
High-Clearance RV Cover
- 12-gauge extra-strength frame
- Boxed-eave roof
- Extended side panels

Most RVs sit parked eleven months of the year. In that time, the sun does more damage than the road ever will. A metal RV cover from Metal Dreams stops that damage before it starts. We build custom RV covers across Jacksonville, AR, sized to your actual coach: Class A motorhomes, fifth wheels, travel trailers, and everything with a slide-out or an awning attached. Nothing is pulled from a standard chart. You tell us what you own, and we size the cover around it, including the clearance a real RV needs that a standard carport usually can't give you. Every estimate is free, written, and comes with no deposit.

Arkansas sun is hard on a parked RV. UV rays chalk gelcoat, dry out roof sealant, and crack tire sidewalls, the same damage most RV repair guides warn owners about.
A metal RV cover stops most of that before it starts, simply by keeping direct sun off the coach. Metal Dreams builds each RV cover from galvanized steel framing rated for Jacksonville, AR wind and storm loads, not a lightweight frame that flexes in a strong gust. Taller structures like RV covers catch more wind than a standard carport, so anchoring is specified for the height of your specific cover, not a generic average.

An RV cover and a standard carport are built the same basic way: a steel roof on posts, open on the sides. The difference is sizing.
A carport is specced for a car or truck, while an RV cover is specced for a motorhome, fifth wheel, or travel trailer, which means more leg height to clear the roofline and any rooftop air conditioner, and more width to let slide-outs and awnings open without backing the RV out first. Most RVs also sit parked far more than they're driven, often eleven months out of twelve, so the cover is doing most of its real work while the RV just sits there. A properly sized one protects that investment during all the idle time, not just on travel days.

No two RVs are the same size, so no two covers should be either. Metal Dreams builds custom RV covers for Class A motorhomes, fifth wheels, travel trailers, and toy haulers across Jacksonville, AR.
Height is set for your coach, including the rooftop air conditioner, with enough clearance left over that you're not ducking under the roofline every time you walk underneath. Width is measured so slide-outs and awnings open fully without you pulling the RV forward first. Fifth wheels and gooseneck trailers get extra length up front for the hitch overhang, not just a box sized to the body. If you own more than one RV, or plan to upgrade coaches down the road, we size the cover with that in mind too.

The right RV cover size depends on what you're parking under it. Here's how we size for the three most common situations.
Leg height is set to clear your coach's full height, including the rooftop air conditioner, with room to spare. We'd rather build in an extra few inches than have you worrying about clearance every time you pull in or back out.
These need length and clearance for the hitch overhang up front, not just a cover sized to the main box. We measure the whole rig, hitch included, so the front edge isn't left exposed to the weather it was supposed to be under.
Width gets measured so you can extend a slide-out or roll out an awning without pulling the RV forward first. A cover that's just wide enough to clear the parked RV usually isn't wide enough to clear it once the slide-out is open.
Two starting points we quote often. Every dimension, door, and finish changes to fit your site.



Most RV covers stay fully open on the sides, which keeps airflow underneath and keeps the structure simple to permit.
The most common add-on is a closed back wall and one side panel, placed on whichever direction catches the worst wind and rain. That blocks weather from the direction it actually comes from, without turning the cover into a fully enclosed building. Full enclosure is also an option if your site allows it, but it usually brings different permit requirements than an open-sided or partially closed cover. We'll tell you which approach fits your lot and your county's rules before you commit to one, rather than after the fact.

The taller the structure, the more wind it will catch. An RV cover is taller than a typical carport and is designed to clear a Class A roofline or a fifth wheel's hitch, so it requires anchoring that's meant for that extra height, not something that was meant for a shorter cover.
Metal Dreams determines anchor depth and hardware for the actual height of your RV cover and the wind you experience on your Jacksonville, AR site, whether you are anchoring on a poured slab, compacted gravel, or bare ground. A properly sized and anchored steel RV cover will last more than a single reroof of the coach underneath it, and will outlast the cost of repeated repairs of the gelcoat and seams on the coach.

RV cover prices depend on height, width, length, and whether you're adding a closed back wall and side panel or keeping it fully open.
A cover sized for a single Class A coach costs less than a wide, tall structure built for a fifth wheel with full slide-outs, or one with closed sides added. There's no single number that fits every RV, since a cover built for a 30-foot trailer and one built for a 40-foot diesel pusher aren't the same project. Rather than quoting an average, we look at your coach's actual dimensions and your site, then give you a written estimate, not a verbal figure that changes once the crew shows up. There's no deposit required to get that number.

The first step in installation is the ground on which your RV cover will sit. Concrete, compacted gravel, and bare ground each anchor differently, and a taller structure like an RV cover needs anchoring specified for its height, since it catches more wind than a low carport does.
Metal Dreams has been pouring concrete throughout Central Arkansas for over 30 years and if you need a slab poured before your cover is installed, it is a part of the discussion and not a separate project you need to coordinate. After the foundation is settled, our own crew sets the frame and anchors it (on the date you were quoted) without turning it over to a subcontractor who has never seen your RV or your site.

Tall enough to clear the highest point of the RV, usually the rooftop air unit, with working room above it. Tell us the make and model and we'll size it.
Tell us where you want it and we'll look at the site. Some of our covers stand alone and some sit beside a home or shop.
It can. An enclosed building is often treated differently than an open cover. Closing the back wall and one side is popular because it keeps the structure a cover.
More answers on our FAQ page, or call (501) 258-5935.
Whatever you're parking, a Class A, a fifth wheel, a travel trailer, or more than one RV, the next step is the same. Tell us the make and length of your coach, and we'll tell you the height, width, and anchoring it actually needs. Every custom RV cover quote from Metal Dreams is free, written, and comes with no deposit and no obligation. Call (501) 258-5935 or send the form, and we'll walk you through sizing, the open versus closed-side decision, and anchoring for your specific Jacksonville, AR site. There's no charge just to find out what your RV cover would cost, and no pressure to decide before you're ready.
